Contact & support
Injectune

Continental / Siemens / 150V-S

A2C5917051

Review the coding family, OEM references, vehicle applications, test-plan summary and the checks required before using this injector with an Injectune X1 or X4.

BOSCH IMAUnknown
Check X1 & X4 compatibilityBack to database
CON / unknownIllustration

Continental / Siemens / CON

Continental / Siemens injector

Decorative sketch

A2C5917051

Representative sketch background — not this exact injector.

Profile variants
1
Plan stages
6–6
OEM references
0
Fitment rows
0
Machines
2

Machine compatibility

This profile is listed for both machines. Confirm the pressure range, coding support, fixtures, cables and installed software before use.

X1 & X4
compatibility

2100 / KOMTEST CRI 2100

Injectune X1

Single-channel platform · 2,500 bar platform envelope

View Injectune X1
Injectune X1 single-channel common rail injector test bench
X1

Capability overview

Profile, coding and connection requirements for this machine.

Test profile
Profile listed

Assigned by the universal Injectune profile mapping; actual test capability requires final application confirmation.

Injector coding
Profile listed

Coding is included in the universal Injectune profile mapping; software, procedure, pressure, and application capability require confirmation.

Fixtures & cables
Confirmation required

Exact fixture, cable, connection set, and software package must be confirmed for the injector and installed machine configuration.

Open Injectune X1Confirm configuration

2300 / KOMTEST CRI 2300

Injectune X4

Four-channel platform · 2,200 bar platform envelope

View Injectune X4
Injectune X4 four-channel common rail injector test bench
X4

Capability overview

Profile, coding and connection requirements for this machine.

Test profile
Profile listed

Assigned by the universal Injectune profile mapping; actual test capability requires final application confirmation.

Injector coding
Profile listed

Coding is included in the universal Injectune profile mapping; software, procedure, pressure, and application capability require confirmation.

Fixtures & cables
Confirmation required

Exact fixture, cable, connection set, and software package must be confirmed for the injector and installed machine configuration.

Open Injectune X4Confirm configuration

Technical identity

Injector
specifications

The fields below summarize identity, coding and test-plan data. Operating commands, currents, acceptance limits and calibration values are not published here.

Manufacturer

Continental / Siemens

Injector families

150V-S

Actuation

Unknown

Coding families

BOSCH IMA

Coding variants

IMA-7

Maximum plan pressure

1,600 bar

Profile variants

1

Plan stage range

6–6

Test-plan summary

6 recorded stage types

ConditioningDynamic LeakEmissionHigh LoadLeak ReturnPilot

Aliases & lookup forms

Part-number formats

A2C5917051

OEM and vehicle references

Use these references for identification, then confirm the number stamped on the injector before testing or coding.

Cross-reference
information

OEM references

0 references attached

No OEM cross-reference is attached to this snapshot yet.

Application fitment

Vehicle and engine reference rows

Displayed as identification guidance, not installation approval. Always verify the stamped injector and OEM documentation.

No exact vehicle fitment rows are attached to this profile.

Data source and publication status

Data
provenance

Machine listing

X1 and X4 / confirmation required

Rights status

First Party Internal

Source types

Native Profile

Enrichment publication

Enabled

Related profiles

Similar injector profiles

Continental / Siemens / 150V-S

A2C5913554

BOSCH_IMA

Continental / Siemens / 150V-S

A2C59500610

BOSCH_IMA

Continental / Siemens / 150V-S

A2C59513554

BOSCH_IMA · CONTINENTAL_IIC

Continental / Siemens / 150V-S

A2C59517051

BOSCH_IMA · CONTINENTAL_IIC

Continental / Siemens / 150V-S

A2C3999700080

BOSCH_IMA

Continental / Siemens / 150V-S

A2C9626040080

BOSCH_IMA

Contact us on WhatsApp